Seminars and Events

Filter: show upcoming events

Past events

Nanoporous gold: 3D structural analyses of RVEs and their implication on scaling relations of mechanical behavior

Thu 06.07.2017
Room change: IC 03-606
Erica Lilleodden, Helmholtz-Zentrum Geesthacht, Geesthacht

Nanostructured surfaces inspired by nature

Thu 29.06.2017
Hendrik Hölscher, Institute of Microstructure Technology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen

Phase separation and demixing in a temperature gradient - experiments and simulation

Thu 11.05.2017
Markus Rettenmayr, Metallic Materials Department, Friedrich-Schiller-University Jena, Jena

Phase transformation phenomena in alloys produced by laser additive manufacturing

Thu 27.04.2017
Eric Jägle, Max-Planck Institut für Eisenforschung, Düsseldorf

Phase-field simulation of solidification, heat tretment and thermomechanical processing of Ni-base superalloys

Thu 30.03.2017
Johannes Victor Görler, Scalebridging Thermodynamic and Kinetic Simulation, Ruhr-Universität Bochum, Bochum, Ingo Steinbach, Ruhr-Universität Bochum, Bochum

Mattered ordered by quantum phase fields: Emergent gravity in an dynamic universe

Thu 16.03.2017
Ingo Steinbach, Ruhr-Universität Bochum, Bochum

Versuch einer Ontologie der physikalischen Welt

Thu 16.03.2017
Ingo Steinbach, Ruhr-Universität Bochum, Bochum

Selective electron beam melting: A powder bed based additive manufacturing technology for high performance alloys

Thu 26.01.2017
Carolin Koerner, Department of Materials Science and Engineering, Friedrich-Alexander Universität Erlangen-Nürnberg, Erlangen

Recent progress of the study of phase transformations by CVM and PPM

Wed 25.01.2017
Tetsuo Mohri, Center for Computational Materials Science, Tohoku University, Sendai

Magnetic and magnetoelectric smallscale robots

Mon 23.01.2017
Salvador Pané i Vidal, ETH Zurich, Zurich

Automated electron Diffraction Tomography (ADT): A key to complex structures of nano crystals

Thu 12.01.2017
Ute Kolb, Johannes Gutenberg-Universität Mainz, Mainz

Elastic strain engineering based on quantum-mechanical calculations

Thu 15.12.2016
Martin Friák, Academy of Sciences of the Czech Republic, Brno

First-principles modelling of screw dislocation mobility in Zr and Ti

Thu 08.12.2016
Emmanuel Clouet, Service de Recherches de Métallurgie Physique, Université Paris-Saclay, Gif-sur-Yvette

Multiscale modelling of dislocation and plastic deformation in Magnesium and other HCP metals

Thu 17.11.2016
Zhaoxuan Wu, Ecole polytechnique fédérale de Lausanne, Lausanne

Discrete kinetic theory: Lattices and entropy

Wed 09.11.2016
Santosh Ansumali, Department of Engineering Mechanics, Jawaharlal Nehru Centre for Advanced Scientific Research

Engineering solutions for the conservation of cultural heritage

Thu 14.07.2016
Bill Wei, Rijksdienst voor het Cultureel Erfgoed, Amsterdam

Interaction and diffusion of solutes in Fe alloys: New insights from first principles

Thu 07.07.2016
Chu-Chun Fu, Service de Recherches de Métallurgie Physique, Université Paris-Saclay, Gif sur Yvette

Leicht und hochfest direkt aus der Schmelze: Gießwalzen am LWK

Thu 30.06.2016
Mirko Schaper, Universität Paderborn, Paderborn

On the mechanical behaviour of nonwovens

Thu 23.06.2016
Alvaro Ridruejo, ICAMS/STKS, Universidad Politécnica de Madrid, E. T. S. de Ingenieros de Caminos Canales y Puertos, Madrid

On the role of planar faults during creep of single crystal superalloys with γ/γ' microstructures

Thu 19.05.2016
Michael Titus, Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf

The influence of hydrogen on mechanical behavior of metallic materials

Fri 13.05.2016
Matous Mrovec, Fraunhofer-Institut für Werkstoffmechanik, Freiburg

Hidden pathway and defect generation during structural phase transformations

Tue 03.05.2016
Yunzhi Wang, Department of Materials Science and Engineering, The Ohio State University, Columbus, Yipeng Gao, The Ohio State University, Columbus

Modeling the structural stability during delithiation in battery materials from first-principles

Tue 03.05.2016
Jan-Michael Albina, Ruhr-Universität Bochum, Bochum

Solid surfaces - impact on mechanics and mechano-chemical coupling in small scale systems

Thu 21.04.2016
Jörg Weissmüller, Technische Universität Hamburg-Haburg, Hamburg

Designing electronic phases at oxide interfaces for electronic, spintronic and energy applications

Thu 28.01.2016
Rossitza Pentcheva, Computational Materials Physics, Universität Duisburg-Essen, Duisburg

Very high cycle fatigue of engineering alloys

Thu 19.11.2015
Ulrich Krupp, Laborbereich Materialdesign und Werkstoffzuverlässigkeit, University of Applied Sciences Osnabrück, Osnabrück

Dipolar Bose-Einstein condensates with weak disorder

Mon 16.11.2015
Axel Pelster, TU Kaiserslautern

Ab initio thermodynamics of the CoCrFeMnNi high entropy alloy

Thu 12.11.2015
Blazej Grabowski, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf

Dislocation pattern formation and the similitude principle in a continuum theory of dislocation dynamics

Thu 05.11.2015
Stefan Sandfeld, Department of Materials Science, Friedrich-Alexander-Universität Erlangen-Nürnberg, Fürth

Speeding up materials discovery through high‐throughput ab initio computing

Thu 22.10.2015
Geoffroy Hautier, Université Catholique de Louvain, Louvain

Free energy function of dislocation densities by large scale atomistic simulations

Mon 05.10.2015
Christoph Begau, Ruhr-Universität Bochum, Bochum, Godehard Sutmann, Jülich Supercomputing Centre (JSC), Forschungszentrum Jülich, Jülich, Alexander Hartmaier, Ruhr-Universität ...

Kinetic precipitation paths in solids

Tue 29.09.2015
Manon Bonvalet, Normandie Université, Saint Etienne du Rouvray

The design of magnetic materials with high spin polarization by first-principles

Mon 21.09.2015
Kai-Lun Yao, Huazhong University of Science and Technology, Wuhan, Zu-Li Liu, Huazhong University of Science and Technology, Wuhan, Guo-Ying Gao, Huazhong University of Science and ...

Formation and growth of shear bands in glasses: Existence of an underlying directed percolation transition

Wed 22.07.2015
Jürgen Horbach, Heinrich Heine Universität Düsseldorf, Düsseldorf

Multiscale modelling of materials chemomechanics: from catastrophic brittle fracture to stress corrosion cracking

Thu 02.07.2015
James Kermode, Warwick Centre for Predictive Modelling, University of Warwick, Coventry

New light shed on the dislocation-grain-boundary interaction

Thu 25.06.2015
Christoph Kirchlechner, Department of Structure and Nano-/ Micromechanics of Materials, Max-Planck-Institut für Eisenforschung, Düsseldorf

Nonlinear optical materials and applications

Tue 23.06.2015
Venkatram Nalla, Nanyang Technological University, Singapore

Cyclic contact deformation of metallic materials investigated by instrumented indentation

Thu 18.06.2015
Ruth Schwaiger, Karlsruher Institut für Technologie, Karlsruhe

High-throughput experimentation for discovery of solar fuels

Mon 08.06.2015
Santosh K. Suram, California Institute of Technology, Pasadena

Switchable biomaterial surface: nano-structered implant with photoactivated properties

Mon 18.05.2015
Jürgen Geis-Gerstorfer, Medizinische Werkstoffwissenschaft & Technologie, Universitätsklinikum Tübingen

Influence of misfit stresses on dislocation glide in single crystal superalloys: A three-dimensional discrete dislocation dynamics study

Tue 12.05.2015
Siwen Gao, Ruhr-Universität Bochum, Marc Fivel, Science et Ingénierie des Matériaux et Procédés, Université Grenoble Alpes, St Martin d'Heres, Alexander Hartmaier, Ruhr-Universität ...

Diffusion in high entropy alloys

Thu 07.05.2015
Sergiy V. Divinski, Westfälische Wilhelms-Universität Münster, Münster

Non-locality of effective temperature in a shear driven model glass

Tue 05.05.2015
Fathollah Varnik, Department of Scale Bridging Thermodynamic and Kinetic Simulation, Ruhr-Universität Bochum, Bochum, Dierk Raabe, Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf

Correlation of motion and diffusion in sheared athermal suspensions of deformable particles

Mon 04.05.2015
Fathollah Varnik, Department of Scale Bridging Thermodynamic and Kinetic Simulation, Ruhr-Universität Bochum, Bochum

Cluster expansions for thermodynamics and kinetics of multicomponent mixtures on fixed lattices

Wed 22.04.2015
Marcel Sluiter, Delft University of Technology, Delft

Discovering materials for solar energy conversion

Fri 17.04.2015
Seminar shifted to April 17, 11:00 a.m. IC 03/112
Bruce A. Parkinson, Department of Chemistry, University of Wyoming, Laramie

Lecture: Scientific Methods of Semiconductor Physics

Tue 14.04.2015
Andreas D. Wieck, Ruhr-Universität Bochum, Bochum

Lecture: Semiconductor Physics II: Experiments on Semiconductor quantum devices

Mon 13.04.2015
Arne Ludwig, Ruhr-Universität Bochum, Bochum

Massively parallel multiphase field simulations

Wed 25.03.2015
Marvin Tegeler, Department of micromechanical and macroscopic modelling, Ruhr-Universität Bochum, Bochum, Alexander Monas, Department of Scale Bridging Thermodynamic and Kinetic Simulation, ...

Phase diagrams from first principles using nested sampling

Thu 19.03.2015
Gábor Csány, Engineering Laboratory, University of Cambridge, Cambridge

Real dislocation dynamics

Thu 29.01.2015
Adrian Sutton, Imperial College London, London

Shape memory thin films for medical and elastocaloric applications

Thu 15.01.2015
Eckhard Quandt, Christian-Albrechts-Universität zu Kiel, Kiel

Calculations of high-temperature properties of ceramic materials

Thu 08.01.2015
Michael Finnis, Department of Materials, Imperial College London, London

Recent advances in powder metallurgical research in Sweden

Thu 27.11.2014
Annika Strondl, Swerea KIMAB AB, Kista

Integrated computational materials engineering - a case study on porosity from cast micropores to porous bone structures

Thu 30.10.2014
Andreas Burblies, Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung, Bremen

Capturing the complex physics behind universal grain size distributions in thin metallic films

Wed 29.10.2014
Axel Voigt, Department of Mathematics, Technische Universität Dresden, Dresden

Modeling the static mechanical properties of magneto-sensitive elastomers

Thu 16.10.2014
Marina Grenzer, Leibniz-Institut für Polymerforschung, Dresden

Exploration of ternary subsystems of superalloys by high-throughput thin film experimentation

Wed 17.09.2014
Alfred Ludwig, Materials Research Department, Ruhr-Universität Bochum, Bochum

Thermodynamic modelling of the γ and γ’ phases in the Calphad approach

Wed 17.09.2014
Nathalie J. Dupin, Calcul Thermodynamique, Orcet

Experiment and thermodynamic assessment of the Al-Ni-Mo system

Wed 17.09.2014
Jian Peng, Department of Thermophysics und Thermodynamics, Karlsruhe Institute of Technology, Karlsruhe

Atomistic modeling of γ - γ’ alloys

Wed 17.09.2014
Yuri Mishin, School of Physics, Astronomy and Computational Sciences, Geroge Mason University, Fairfax, VA

Integrated Computational Materials Design (ICME) of Co- and Ni-based superalloys

Wed 17.09.2014
Nicholas Hatcher, QuesTek Innovations LLC, Evanston

Single-crystal nickel-based superalloys developed by numerical multi-criterion optimization techniques based on thermodynamic calculations

Wed 17.09.2014
Ralf Rettig, Lehrstuhl Werkstoffkunde und Technologie der Metalle, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen

New approaches for quantitative analysis of single crystal superalloys based on advanced transmission electron microscopy

Tue 16.09.2014
Erdmann Spiecker, Department for Materials Science and Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen

Atomistic simulations of dislocation-interface interactions in the γ/γ’ microstructure in Ni-based superalloys

Tue 16.09.2014
Juan Wang, Department of Materials Science and Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen

First-principles thermodynamics and kinetics of high temperature materials

Tue 16.09.2014
Anton van der Ven, Materials Department, University of California Santa Barbara, Santa Barbara

Can slow-diffusing solute atoms reduce vacancy diffusion in Ni-based superalloys?

Tue 16.09.2014
Kamal Nayan Goswami, University of Birmingham, Birmingham

Vacancy mobility and interaction with transition metal solutes in Ni

Tue 16.09.2014
Sergej Schuwalow, Department of Atomistic Modelling and Simulation, Ruhr-Universität Bochum, Bochum

Characterization of Ni- and Co-based superalloys using atom probe tomography

Tue 16.09.2014
Pyuck-Pa Choi, Max-Planck-Institut für Eisenforschung, Düsseldorf

Strength and stability of Co 3 (Al,W) L12γ'

Tue 16.09.2014
Chris Wolverton, Department of Materials Science and Engineering, Northwestern University, Evanston, Illinois

Planar faults energies in multicomponent Co-base superalloys

Tue 16.09.2014
Alessandro Mottura, University of Birmingham, Birmingham

Partitioning and sublattice preference of alloying additions in Co-Co3W system

Tue 16.09.2014
Sri Raghunath Joshi, Department of Materials Engineering, Indian Institute of Science Bangalore, Bangalore

TCP precipitates in Co-based superalloys studied with atomistic calculations

Tue 16.09.2014
Jörg Koßmann, Ruhr-Universität Bochum, Bochum

Members assembly of the materials department

Mon 15.09.2014
no person found!!

Initial stage of creep in Ni superalloys: a 3D discrete dislocation dynamics investigation

Mon 15.09.2014
Marc Fivel, Science et Ingénierie des Matériaux et Procédés, Université Grenoble Alpes, St Martin d'Heres

Modeling precipitate-dislocation interactions in Ni-base superalloys

Mon 15.09.2014
Yunzhi Wang, Department of Materials Science and Engineering, The Ohio State University, Columbus

Characterization and modeling of the propagation of creep dislocations from the interdendritic boundaries in single crystal Ni base superalloys

Mon 15.09.2014
Masood Hafez Haghighat, Department of Microstructure Physics and Metal Forming, Düsseldorf

A meso-scale approach to superalloys microstructure modeling

Mon 15.09.2014
Mohan Kumar Rajendran, Department of Scale Bridging Thermodynamic and Kinetic Simulation, Ruhr-Universität Bochum, Bochum

Ab initio determination of point defects and derived diffusion properties in metals

Mon 18.08.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf, Albert Glensk, Roman Nazarov, Max-Planck-Institut für Eisenforschung ...

Simultaneous evolution of microstructure and precipitation - state of the art modelling with MatCalc

Thu 10.07.2014
The talk has been shifted from June 26 to July 10
Ernst Kozeschnik, Vienna University of Technology, Vienna

Plasticity in hard materials - testing at small scales and high temperatures

Thu 03.07.2014
Sandra Korte-Kerzel, RWTH Aachen, Aachen

Preparation and characterization of thin film energy materials: photo voltaic, photo synthesis and batteries

Thu 05.06.2014
Wolfram Jaegermann, Material- und Geowissenschaften, Technische Universität Darmstadt, Darmstadt

Impact of light elements on interface properties in steels

Mon 26.05.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf, Roman Nazarov, Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, ...

Ab initio basierte Methoden der mechanismen-orientierten Werkstoffentwicklung

Thu 08.05.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf

New methods for the mechanical characterization of polymers and the entropy wheel

Thu 08.05.2014
Manfred Wilhelm, Karlsruher Institut für Technologie, Karlsruhe

Ab initio based understanding of the segregation and diffusion mechanisms of hydrogen in steels

Tue 06.05.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf, Roman Nazarov, Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, ...

Understanding complex materials at finite temperatures by ab inito methods

Wed 16.04.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf

Mechanisms of ultra-light sliding wear

Thu 10.04.2014
Alfons Fischer, Institut für Produkt Engineering, Universität Duisburg-Essen, Duisburg

Ab initio based modelling of stacking fault energies in high-strength steels

Tue 18.03.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf, Fritz Körmann, Department of Computational Materials Design, Max-Planck-Institut ...

Ab initio based understanding of the segregation and diffusion mechanisms of hydrogen in steels

Wed 19.02.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf, Roman Nazarov, Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, ...

Ab initio based understanding of the segregation and diffusion mechanisms of hydrogen in steels

Thu 23.01.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf, Roman Nazarov, Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, ...

Tribocorrosion: concepts and applications

Thu 23.01.2014
Stefano Mischler, École Polytechnique Féderale de Lausanne, Lausanne

Stresses which affect the microstructure of Ni-base superalloys

Thu 16.01.2014
Uwe Glatzel, Metals and alloys, University of Bayreuth, Bayreuth

Thermodynamics of materials up to the melting point: The role of anharmonicities

Fri 10.01.2014
Tilmann Hickel, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung, Düsseldorf, Albert Glensk, Blazej Grabowski, Department of Computational Materials ...

Environmental TEM study of perovskite electro-catalysts for oxygen evolution

Thu 12.12.2013
The talk is shifted to 12:30
Christian Jooß, Georg-August-Universität Göttingen, Göttingen

From idealized bi-crystals towards applied polycrystals: In-situ deformation experiments at small dimensions

Thu 28.11.2013
Gerhard Dehm, Structure and Nano-/Micromechanics of Materials Department, Max-Planck-Institut für Eisenforschung, Düsseldorf

Synchrotron imaging and diffraction – shedding light on materials behaviour

Thu 14.11.2013
Philip J. Withers, School of Materials, University of Manchester, Manchester

Fundamentals of ductility and fracture in interface dominated intermetallics

Wed 06.11.2013
Easo George, Oak Ridge National Laboratory, Oak Ridge

On the effects of ultra-fine grain sizes on martensitic transformations in NiTi shape memory alloys

Wed 06.11.2013
Jan Frenzel, Department of Materials Science, Ruhr-Universität Bochum, Bochum, J. Burow, Christoph Somsen, Lehrstuhl Werkstoffwissenschaft, Ruhr-Universität Bochum, Bochum, Gunther ...

Unusual mechanical porperties of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy

Wed 06.11.2013
Frederik Otto, Ruhr-Universität Bochum, Bochum

Mechanical characterization of single phases by means of nanoidentation

Wed 06.11.2013
Fabian Pöhl, Institut für Werkstoffe, Ruhr-Universität Bochum, Bochum

Tracking nanoscale interfaces related mechanisms in materials using advanced transmission electron microscopy

Wed 06.11.2013
Hosni Idrissi, Department of Physics, University of Antwerp

TEM investigation of elementary deformation mechanisms in Ni-based single crystal superalloy ERBO1

Wed 06.11.2013
Alireza Basir Parsa, Institut für Werkstoffe, Ruhr-Universität Bochum, Bochum

Interface properties and deformation mechanism of TiAl α2/γ lamellar microstructures from atomistic simulations

Wed 06.11.2013
Mansour Kanani, Ruhr-Universität Bochum, Bochum, Rebecca Janisch, Department of Micromechanical and Macroscopic Modelling, Ruhr-Universität Bochum, Bochum, Alexander Hartmaier, Ruhr-Universität ...

Study of interface chemistry at the atomic level by atom probe tomography

Tue 05.11.2013
George Smith, Department of Materials, University of Oxford, Oxford

Role of the internal interfaces in solar cells

Tue 05.11.2013
Oana Cojocaru-Mirédin, Max-Planck-Institut für Eisenforschung, Düsseldorf, Torsten Schwarz, Max-Planck-Institut für Eisenforschung, Düsseldorf, Andreas Stoffers, Max-Planck-Institut ...

Site-controlled growth of nanowires induced by focus ion beam

Tue 05.11.2013
Sven Scholz, Ruhr-Universität Bochum, Bochum, Rüdiger Schott, Ruhr-Universität Bochum, Bochum, Dirk Reuter, Ruhr-Universität Bochum, Bochum, Alfred Ludwig, Materials Research ...

An integrated SKP-SECM system: linking surface properties and electrocatalytic activity

Tue 05.11.2013
Artjom Maljusch, Ruhr-Universität Bochum, Bochum, John B. Henry, Ruhr-Universität Bochum, Bochum, Aliaksandr Bandarenka, Ruhr-Universität Bochum, Bochum, Wolfgang Schuhmann, ...

Nanostructured iron oxide based composites for photocatalytic hydrogen production

Tue 05.11.2013
Daniel Peeters, Fakultät für Chemie und Biochemie, Ruhr-Universität Bochum, Bochum

Nanoglasses - the way to new types of non-crystalline solids beyond today's glasses

Tue 05.11.2013
Herbert Gleiter, Karlsruhe Institute of Technology, Karlsruhe

Development of layered WO3/TiO2 nanostructures for photoelectrochemical solar water splitting

Tue 05.11.2013
Chinmay Khare, Ruhr-Universität Bochum, Bochum, Kirill Sliozberg, Analytische Chemie, Ruhr-Universität Bochum, Bochum, Robert Meyer, Institut für Werkstoffe, Ruhr-Universität Bochum, ...

Evolution of surface regions during high temperature wear

Tue 05.11.2013
Christopher Rynio, Institut für Werkstoffe, Ruhr-Universität Bochum, Bochum

New properties in artificial ferroelectric oxide superlattices

Tue 05.11.2013
Eric Bousquet, Department of Physics, University of Liege, Liège

Thermal conductivity in nano-structured materials

Tue 05.11.2013
Chandan Bera, Ruhr-Universität Bochum, Bochum

Charge and spin noise in InAs quantum dots

Tue 05.11.2013
Arne Ludwig, Ruhr-Universität Bochum, Bochum

Spectroscopic measurement of the magnetocaloric effect

Tue 05.11.2013
Daniel Hägele, Experimentalphysik, Ruhr-Universität Bochum, Bochum

The kinetics of grain boundary migration below the roughening transition temperature

Mon 04.11.2013
Christopher Race, School of Materials, University of Manchester, Manchester, Johann von Pezold, Department of Computational Materials Design, Max-Planck-Institut für Eisenforschung GmbH, ...

Atomistic simulations of tribo-induced phase transitions

Thu 17.10.2013
Lars Pastewka, Physical modeling of materials, Fraunhofer-Institut für Werkstoffmechanik IWM, Freiburg